Various Borja

[15-30-45] – 23A – 42 – 43 – 43inox – 45N – 57 – 57 Lug
80 – 77 – 82 – 83 – Slip on flanges – Rack wheels

BRIDGE VALVE FIG.15-30-45

FIG.15
FIG.30
FIG.45

IRRYGATION HYDRANT FIG.23 A

FIG.23A

FLANGED “Y” TYPE STRAINER FIG.42

FIG.42 Ø15-Ø400
FIG.42 Ø450-Ø600
  • In cast iron construction.
  • Face to face dimensions according to EN 558-1 Serial F1.
  • Flanges dimensions and holes according to UNE-EN 1092-2 PN16.
  • Holes dimensions according to UNE-EN 1092-2 PN10 / PN16.
  • Download pdf: FIG.42.pdf

THREADED ENDS “Y” TYPE STRAINER FIG.43

FIG.43 Threaded
  • In cast iron construction.
  • Threaded ends according to: DIN 259 / 2999.
  • Download pdf: FIG.43 Threaded.pdf

STAINLESS STEEL THREADED ENDS “Y” TYPE STRAINER FIG.43 Inox.

FIG.43 Threaded SS

DUCTILE BRIDGE VALVE FIG. 45N

FIG.45N
FIG.45N Opcions
  • In ductile iron construction.
  • Flange dimensions and holes according UNE-EN 1092-1 PN10 / PN16.
  • Download pdf: FIG.45N.pdf

FIG.57: KNIFE GATE VALVE

FIG.57
FIG.57 LUG Options
  • In cast iron construction.
  • Joining between flanges according to: UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lb.
  • Download pdf: FIG.57.pdf

KNIFE GATE VALVE LUG TYPE FIG.57

FIG.57 LUG
FIG.57 LUG Opciones


  • Cast iron construction
  • Joining between flanges according to UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lb.
  • Download pdf: FIG.57 LUG.pdf

BALANCE FLOAT VALVE FIG.77

FIG.77

  • Ductile iron construction.
  • Flange dimensions and holes according to: DIN 2502 PN16.
  • Download pdf: FIG.77.pdf

DISMANTLING JOINT FIG.80

FIG.80
  • In carbon steel and stainless steel construction.
  • Flange dimensions and holes according to: DIN 2576 PN10 and DIN 2502 PN16.
  • Download pdf: FIG.80.pdf

SINGLE SPHERE RUBBER EXPANSION JOINT WITH FLANGES FIG.82

FIG.82
  • In carbon steel construction.
  • Flanges dimensions and holes according to: PN10 / PN16.
  • The work temperature is between: -15 ºC and 90ºC.
  • Download pdf: FIG.82.pdf

SPHERE RUBBER EXPANSION JOINT THREADED ENDS FIG.83

FIG.83
  • In galvanized iron construction.
  • Threaded ends according to: DIN 259 / 2999.
  • The work temperature is between: -15 ºC and 90ºC.
  • Download pdf: FIG.83.pdf

SLIP ON FLANGES

SLIP ON FLANGES

  • In carbon steel construction.
  • Flange dimensions and holes according to: DIN 2576 PN10, DIN 2502 PN16 y DIN 2503 PN25.
  • Download pdf: SLIP ON FLANGES.pdf

RACK WHEELS

RACK WHEELS