THREAD TWO PIECES BRASS BALL VALVE FIG.60

manual pdf

Fig.83 Fig.82 Fig.80 Fig.65 Fig.62 Fig.61Fig.60Fig.43 Fig.42 Fig.23A Fig.15

APPLICATIONS:

Thread according DIN 259 / 2999

Vapor. Water. Oil. Gas. Air. Corrosive fluids (some). Slurries. Dry powdered materials.

DN: 15-80
BODY: Brass sandblasting & bright Nickel plating CuZn39Pb3. EN -12164
RACORD: Brass sandblasting & bright Nickel plating CuZn39Pb3. EN -12164
BALL: Polishing & Chrome Plating Brass CuZn39Pb3. EN -12164
SEALING RINGS: PTFE
AXIS: Barrel Nickel Plating Cu Zn39 Pb3. EN -12164
PACKING: PTFE
HANDLE: Polishing & Chrome Plating Steel
NUT: Barrel Nickel Plating Cu Zn39 Pb3. EN -12164
HANDLE COATING: PVC
GLAND: Barrel Nickel Plating Cu Zn39 Pb3. EN -12164
GLUED

CHARACTERISTICS:

Ball valves are quarter-turn, and have a ball drilled elastic rotating seat, allowing direct circulation in the open position and cut the way where the ball is rotated 90 ° closing the duct.

It is recommended:

For driving and cutting service, without strangulation.
When you need quick opening.
For temperatures (-10º to 220ºC).
When you need minimal resistance to movement.

Advantages:

Low cost. High capacity. Cutting Concrete. Movement in a straight line. Few Leak. It cleans by itself. Low maintenance. Does not require lubrication. Compact size. Low torque seals (pair).

TEST AND EMPLOIMENT CHARACTERISTICS ACCORDING EN 12266-1
Sizes	Shell strength tightness	Seat tightness	Working pressure
De Ø15 a Ø80	45 Kg/cm²	33 Kg/cm²	30 Kg/cm²

THREAD TWO PIECES BRASS BALL VALVE FIG.60

1-	BODY
2-	RACORD
3-	BALL
4-	SEALING RINGS
5-	AXIS
6-	PACKING
7-	HANDLE
8-	NUT
9-	HANDLE COATING
10-	GLAND
11-	GLUED