DISMANTLING JOINT FIG.80

With threaded sticks

manual pdf

Fig.83 Fig.82Fig.80Fig.65 Fig.62 Fig.61 Fig.60 Fig.43 Fig.42 Fig.23A Fig.15

DISMANTLING JOINT FIG.80

Flange dimensions and holes according UNE-EN 1092-2 PN10 / PN16

APPLICATIONS:

The dismantling joint enables easy installation and dismantling of isolating valves, not return valves, low metering equipment, pumps etc.
It compensates for axial displacement of the pipe during installation/.Dismantling.
For water, sewage and neutral liquids to max. temperature. 70 ºC.

PN: 10/16
DN: 50-600
FLANGES: Carbon steel. ST 37
TUBES: Stainless steel. X2CrNi18-9
SCREW: Steel 5.6 Zn. EN-24017
NUT: Steel 5.6 Zn. EN-24017

OPTIONS:

Flanges and tubes in Epoxy coating RAL 5015 to size Ø400. For up to size Ø400 in anticorrosive coating RAL 5015.
On demand Epoxy coating RAL 5015 for up to size Ø400.
Threaded rod and nuts are not included in the dismantling joint, it is an option

1-	ABOVE FLANGE OF OUTER TUBE
2-	OUTER TUBE
3-	INNER TUBE
4-	SCREW
5-	DOWN FLANGE OF OUTER TUBE
6-	SEALING RING
7-	MOBILE FLANGE
8-	NUT
9-	FLANGE INNER TUBE