Various Borja

– FIG.15-30-45 BRIDGE VALVES

– FIG.23A IRRYGATION HYDRANT

– FIG.42 STRAINER 

– FIG.43 THREADED STRAINER 

– FIG.43 THREADED STAINLESS STEELSTRAINER 

– FIG.45N DUCTILE BRIDGE VALVE

– FIG.57 KNIFE GATE VALVE WAFER TYPE

– FIG.57 KNIFE GATE VALVE LUG TYPE

– FIG.77 BALANCE FLOAT VALVE

– FIG.80 DISMANTLING JOINT

– FIG.82 RUBBER EXPANSION JOINT

– FIG.83 THREADED RUBBER EXPANSION JOINT

– SLIP ON FLANGES

– RACK WHEELS

BRIDGE VALVE FIG.15 – FIG.30 – FIG.45

FIG.15-FIG.30-FIG.45

 

  • In cast iron construction.
  • BRIDGE VALVE FIG.15: The bridge of this valve is threaded at the top (it does not have a nut). Only Ø400 and Ø500 have a brass nut with thread.
  • BRIDGE VALVE FIG.30: It is the same valve FIG.15 except the two interchangeables brass bridge-nuts.
  • BRIDGE VALVE FIG.45: It is the same valve FIG.15 except the flange-base drilling according UNE-EN 1092-2 PN-10
  • Download pdf: FIG.15  FIG.30  FIG.45.pdf

 

IRRYGATION HYDRANT FIG.23A

FIG.23A

 

 

  • In cast iron construction.
  • Openning and seal pieces in brass contruction.

 

 

 

 

 

FLANGED “Y” TYPE STRAINER FIG.42

FIG.42
  • In cast iron construction (From Ø15 to Ø400).
  • In carbon steel construction (From Ø450 to Ø700).
  • Face to face dimensions according to EN 558-1 Serial F1.
  • Flanges dimensions and holes according to UNE-EN 1092-2 PN16 (From Ø15 to Ø400).
  • Flanges dimensions and holes according to UNE-EN 1092-2 PN10 or PN16 (From Ø450 to Ø700).
  • Holes dimensions according to UNE-EN 1092-2 PN10 / PN16.
  • Download pdf: FIG.42.pdf

 

THREADED ENDS “Y” TYPE STRAINER FIG.43

FIG.43 THREADED

 

  • In cast iron construction.
  • Threaded ends according to: DIN 259 / 2999.
  • Download pdf: FIG.43 THREADED.pdf

 

 

 

 

STAINLESS STEEL THREADED ENDS “Y” TYPE STRAINER FIG.43

FIG.43 THREADED STAINLESS STEEL.

 

 

 

 

 

 

 

DUCTILE BRIDGE VALVE FIG. 45N

FIG.45N
FIG.45N OPTIONS

 

  • In ductile iron construction.
  • Flange dimensions and holes according UNE-EN 1092-1 PN10 / PN16.
  • Download pdf: FIG.45N.pdf

 

 

 

KNIFE GATE VALVE WAFER TYPE FIG.57

FIG.57 WAFER TYPE
FIG.57 WAFER TYPE OPTIONS
  • In cast iron construction.
  • Joining between flanges according to: UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lb.

 

 

 

 

 

KNIFE GATE VALVE LUG TYPE FIG.57

FIG.57 LUG TYPE
FIG.57 LUG TYPE  OPTIONS

 

  • Cast iron construction
  • Joining between flanges according to UNE-EN 1092-2 PN10 or ANSI B16.5 ASA 150 lb.
  • Download pdf: FIG.57 LUG TYPE.pdf

 

 

 

BALANCE FLOAT VALVE FIG.77

FIG.77

 

  • Ductile iron construction.
  • Flange dimensions and holes according to: DIN 2502 PN16.
  • Download pdf: FIG.77.pdf

 

 

 

DISMANTLING JOINT FIG.80

FIG.80
FIG.80 OPTIONS
  • In carbon steel and stainless steel construction.
  • Flange dimensions and holes according to: DIN 2576 PN10 and DIN 2502 PN16..
  • Download pdf: FIG.80.pdf

 

 

 

 

SINGLE SPHERE RUBBER EXPANSION JOINT WITH FLANGES FIG.82

FIG.82
  • In carbon steel construction.
  • Flanges dimensions and holes according to: PN10 / PN16.
  • The work temperature is between: -15 ºC and 90ºC.
  • Download pdf: FIG.82.pdf

 

 

 

SPHERE RUBBER EXPANSION JOINT THREADED ENDS FIG.83

FIG.83
  • In galvanized iron construction.
  • Threaded ends according to: DIN 259 / 2999.
  • The work temperature is between: -15 ºC and 90ºC.
  • Download pdf: FIG.83.pdf

 

 

 

SLIP ON FLANGES

SLIP ON FLANGES
  • In carbon steel construction.
  • Flange dimensions and holes according to: DIN 2576 PN10, DIN 2502 PN16 y DIN 2503 PN25.
  • Download pdf: SLIP ON FLANGES.pdf

 

 

 

RACK WHEELS

RACK WHEELS